Opens in a new tab
HighColor LED Display Screen Manufacturer: High Standard, True Color

Modular LED Screen

Build the wall around your space. Plan every replaceable part.

Create a fixed LED video wall from serviceable modules and cabinets, with a size and pixel canvas suited to your content. Highcolor can review the cabinet layout, service access and control system as one project—from the first installation to a planned future extension.

A1

A2

A3

A4

B1

B2

B3

B4

C1

C2

C3

C4

Cabinet-map concept: each position has a service address. Blue marks a possible extension column; an extension still needs a compatible product, revised support, power and controller capacity. Diagram only.

Module → cabinet → complete screen

Understand what is being supplied before comparing quotations.

LED module

The light-emitting assembly fitted to the cabinet or support system. Dimensions, pixel matrix, mounting points, driver configuration and connections determine whether a replacement will work.

LED cabinet

The structural unit that aligns modules and houses or connects the display electronics. Cabinet geometry sets the wall’s building grid; a nominal pixel pitch alone does not define it.

Installed system

Cabinets, mounting structure, power distribution, receiving cards, controller and content workflow form the working screen. Specify this complete scope rather than comparing a bare module price with a turnkey wall.

This page focuses on permanent installations. Modular construction makes parts serviceable and sizes configurable; it does not make a fixed wall a portable rental screen.

A bigger wall and a sharper wall are different decisions.

First choose the physical opening and content format. Then calculate the pixel canvas from a compatible cabinet and pitch.

Illustrative planning grid: 640 × 480 mm cabinets at P2.5 (256 × 192 pixels per cabinet)
Cabinet grid (W × H)CabinetsScreen sizeNative pixelsAspect ratio
4 × 3122.56 × 1.44 m1,024 × 57616:9
6 × 4243.84 × 1.92 m1,536 × 7682:1
8 × 6485.12 × 2.88 m2,048 × 1,15216:9

These are calculated layout examples, not confirmed Highcolor model specifications. The selected product must support the stated cabinet size and pitch. Width = cabinet columns × cabinet width; pixel width = columns × cabinet pixel width.

Keep the size; change the detail

At 2.56 × 1.44 m, an illustrative P2.0 configuration gives 1,280 × 720 pixels; P2.5 gives 1,024 × 576. Finer pitch increases detail without increasing the wall dimensions. Confirm the smallest text at the closest viewing position.

Keep the pitch; change the canvas

Adding cabinets increases both the physical size and pixel count. Recheck processor width and height limits, output-port loading, source scaling and content aspect ratio—not only the controller’s total pixel capacity.

Design the wall around its service route.

A replaceable module is useful only when a technician can reach it and restore the picture.

Front-service installation

For shallow recesses and walls without rear access, confirm which parts are removable from the front: modules, power supplies and receiving cards. Include extraction-tool clearance and a safe route to the upper rows.

Rear-service installation

Where the product requires rear maintenance, reserve a working access route and keep cables and structural members clear of removable parts. Do not approve the wall depth from the cabinet depth alone.

Cabinet alignment & finishing

Review the support’s flatness, adjustment method, corner transitions and decorative trim. Module replacement must remain possible after the surrounding joinery or cladding is complete.

Plan expansion before ordering the first cabinet.

A matching pixel pitch does not establish interchangeability.

Mechanical match

Check cabinet dimensions, locating pins, locks, depth, module fixing method and permissible mounting orientation. A new cabinet must fit the existing support and meet the alignment requirements.

Electrical & control match

Compare power ratings, connectors, pinout, receiving-card configuration, driver IC and scan method. Have the supplier validate a combined configuration before ordering additions.

Optical match

Record the LED package, batch and calibration data. New and aged modules may differ in brightness or color; calibration can help but should not be treated as a guaranteed invisible match.

If expansion is likely, ask for a written compatibility plan and a separate price for same-batch spare modules or reserved cabinets. Confirm availability and storage conditions. Leave capacity in the support, electrical supply and control system; future expansion is not guaranteed simply because the screen is modular.

From wall survey to a maintainable installation

Request these deliverables with the project, so installation and later repairs use the same reference.

01 / Survey & layout

Record opening dimensions, viewing positions, ambient light, service route and structural constraints. Agree a cabinet map and the exact native pixel canvas.

02 / Integration plan

Document support interfaces, power and signal routes, circuit grouping and controller-port mapping. Identify who supplies the structure, electrical work and content source.

03 / Handover & spares

Request cabinet labels, approved configuration files, calibration backups, spare-part identification and a replacement procedure. Agree the project’s acceptance criteria before delivery.

Compare the complete installed scope.

A price per square metre can hide meaningful differences in what is included.

Display package

State the pixel pitch, cabinet count, service method, LED packaging, brightness target and operating environment. Confirm whether spare modules, power supplies and receiving cards are included.

Site & lifetime costs

List the controller, frame, distribution, freight, installation and commissioning separately. Compare service access, spare availability and replacement labor alongside the initial equipment price.

For an initial quotation, send the target width and height, indoor or outdoor location, nearest viewing distance, photos or drawings of the wall, intended content and whether later expansion is required. Highcolor can then review a defined configuration instead of applying a generic price to an undefined screen.

Modular LED screen FAQ

Can I replace only the faulty part?

Often a compatible module can be replaced without replacing the entire screen, but the accessible parts and procedure depend on the chosen system. Confirm the module, power-supply and receiving-card service paths and specify spares with the original order.

Can I mix cabinets from different manufacturers?

Do not assume compatibility. Equal pitch or external dimensions do not establish matching locks, electronics, mapping or color performance. Require technical validation of the exact combination.

Can a fixed modular screen move between venues?

A permanent wall is designed around its installed support, wiring and service plan. Frequent transport and rebuilding call for a suitable rental system with approved handling, locking and transport provisions.

Can the wall be curved or built around a corner?

Only with a product and mounting system designed for that geometry. Flat modular cabinets are not automatically bendable. Define the radius or corner angle and review the resulting seams and content mapping.

Will a modular wall have visible seams?

The goal is a continuous picture. Alignment, module tolerances, color matching and support flatness all affect the result. Review sample joints and agree picture-uniformity criteria at the intended viewing positions.

Does modular construction make it weatherproof?

No. An outdoor installation needs a suitable enclosure and complete weather-management design. Confirm the proposed product’s protection ratings, connections, drainage and operating conditions for the actual location.

Start with a wall plan, not just a pixel pitch.

Send your dimensions, site photos and future expansion plan. We can review the cabinet grid, service access and quotation scope together.

Request a modular screen proposal