NovaStar · COEX LED processor/controller
NovaStar MX40 Pro: Specifications, Compatibility & Comparison
A model-specific guide focused on 9M loading, 20 Ethernet outputs, 4K inputs, COEX features and MX30 comparison.
At a glance
MX40 Pro Key Specifications
9 million pixels
Loading/capacity reference for this exact model or family.
LED Output
20 × EtherCON + 4 × 10G optical
Source / Input
3× HDMI 2.0 + DP 1.2 + 12G-SDI
| Specification | Model-specific information |
|---|---|
| Chassis | 2U |
| Layers | 4 |
| Genlock | Supported |
| HDR | HDR10 / HLG |
| 3D | Supported |
| Control | 1G Ethernet / TCP-IP |
| Advanced A10s Pro features | Dynamic Booster, thermal compensation and full grayscale calibration in supported configuration |
Legacy or revision-sensitive products should be verified against the exact product label and manufacturer document before firmware updates, replacement or final engineering.
Search intent
What Matters When Selecting MX40 Pro
COEX Workflow
Current COEX systems use VMP and supported receiving cards. Advanced display features depend on the controller, receiving card and LED driver IC working as a compatible system.
Migration
Moving from an older NovaStar controller to COEX can be a platform migration rather than a simple box replacement. Check receiving cards, firmware and configuration workflow.
Comparison
MX40 Pro vs Related Models
| Feature | MX40 Pro | MX30 | KU20 |
|---|---|---|---|
| Role | COEX LED processor/controller | COEX LED processor/controller | COEX LED processor/controller |
| Lifecycle | Current COEX family | Current COEX family | Current COEX family |
| Loading / capacity | 9 million pixels | 6.5 million pixels | 3.9 million pixels |
| LED-side outputs | 20 × EtherCON + 4 × 10G optical | 10 × EtherCON + 2 × 10G optical | 6 × EtherCON + 1 × 10G optical |
| Inputs / source side | 3× HDMI 2.0 + DP 1.2 + 12G-SDI | HDMI 2.0 + HDMI 1.4 + DP 1.1 + 2×3G-SDI | 1 × HDMI 1.3 |
The comparison is intended to show product role and generation differences. For legacy products with incomplete current documentation, exact specifications are intentionally not inferred from adjacent models.
Project checklist
Before Buying or Replacing MX40 Pro
Screen Resolution
Record total width × height, cabinet resolution and Ethernet-port mapping.
Receiving Cards
Identify the exact receiving-card model, hub board and current configuration file.
Video / Content Source
List the required video connectors or publishing method instead of assuming another model has the same inputs.
Software & Firmware
Match the controller/player generation before upgrading firmware or configuration software.
Replacement Goal
Decide whether you need a drop-in spare or a platform upgrade with new features.
Backup
Keep mapping, receiving-card parameters, firmware information and photos before service work.
FAQ
MX40 Pro FAQ
What is MX40 Pro used for?
MX40 Pro is a COEX LED processor/controller in the NovaStar ecosystem.
What is the loading capacity of MX40 Pro?
9 million pixels. Width/height, per-port and module-level limits must also be checked where applicable.
What are the main outputs?
20 × EtherCON + 4 × 10G optical.
Can MX40 Pro replace another controller/player/card?
Not automatically. Match product role, capacity, interfaces, receiving cards, software generation and existing configuration first.
Which related models should I compare?
MX30, KU20, A10s Pro.
Technical references
Manufacturer Resources
Key specifications on this page were checked against manufacturer product pages, comparison pages, specifications or download resources where currently available.
Need NovaStar MX40 Pro or a Compatible Replacement?
Send the product label, LED screen resolution, receiving-card model and current connection diagram. Highcolor can check the required control-system configuration before quotation.
Send Your System Details →