Pop-up retail
Move product campaigns between short-term shops. Check the access route and power at each location.
A full-height campaign at the venue. A more compact format between stops. Build your event display around the way your team transports, sets up and uses it.

Highcolor’s foldable LED poster brings a portrait LED screen, folding frame, integrated playback and rolling casters into one display format. It suits teams that reuse digital signage across temporary locations.
The current range lists flexible LED modules within a foldable aluminum structure. Use the approved folding mechanism and handling procedure; the display should not be bent beyond its designed movement.
Move product campaigns between short-term shops. Check the access route and power at each location.
Prepare one repeatable screen, content and packing workflow for successive shows.
Specify protection, spares and inspection routines for equipment that changes hands.
Keep content templates consistent while adapting playlists to each venue.
For a display that stays in one interior, also compare the indoor poster. For exterior use, start with the outdoor poster range and its site requirements.
Display area, folded dimensions and shipping dimensions answer different questions. Request a drawing for each state before choosing the packing and transport method.
Conceptual states, not to scale. Dimensions and folding geometry depend on the selected model.
Check total height, base width and depth, service clearance, pedestrian routes and the floor surface.
Check case dimensions, gross weight, door and lift openings, vehicle capacity and the handling method.
Enter external case dimensions in centimetres. Use equivalent unit counts and accessories for both packing options.
Reference packing
Proposed folded packing
This calculates geometric volume only. Freight charges also depend on gross weight, carrier rules, route and service level.
Use the current range information as a starting point, then approve a model-specific specification and packing list.
| Specification | Current product information | Confirm for the ordered model |
|---|---|---|
| Frame & folding | Foldable aluminum structure with flexible LED modules | Folding direction, locking points, allowed operating positions and mechanism drawing |
| Service access | Magnetic front maintenance | Module removal procedure, service tools and access clearance |
| Refresh rate | 3840 Hz listed configuration | Exact model and drive configuration; camera test if required |
| Surface protection | GOB optional | Compatibility, repair procedure and replacement module specification |
| Handling | Rolling casters | Unit weight, base footprint, wheel/leveling arrangement and handling instructions |
| Content management | USB, Wi-Fi and cloud options | Controller model, physical inputs, software, storage and platform charges |
| Image & electrical | Specify for the selected configuration | Pitch, active dimensions, native pixels, operating brightness, input voltage and maximum/average power |
| Packing & expansion | Specify for the project | Folded dimensions, case size, gross weight, accessories and multi-unit compatibility |
Provide the closest viewing distance and a sample of the smallest text. Confirm the native pixel width and height before preparing portrait content.
Optional GOB can be considered for the display surface. It does not replace a protective case or establish the weather rating of the complete unit.
Use a local playlist or a network-managed campaign with the appropriate player. Confirm file formats, local storage, software access and the update method.
For venues with unreliable internet, agree an offline playback workflow and test the stored content before dispatch.
For one image across several posters, request compatible cabinet edges, joining hardware, alignment instructions and a signal diagram.
Maximum unit count depends on native resolution, controller load and interfaces. Power linking needs its own electrical limits; it is separate from signal cascading.
A folding mechanism does not automatically provide double-sided playback, battery operation or a wider video wall. Include any of these requirements in the configuration review.
Use a consistent four-step process, supported by the selected model’s operating instructions and your venue plan.
Check the packed dimensions and weight against vehicle, lift and doorway limits. Agree the loading equipment and number of handlers.
Follow the supplied unfolding sequence. Secure the frame, check alignment and place the unit on a suitable level floor with clear circulation.
Connect the approved power and control equipment. Test native-resolution content, schedules, brightness and any multi-screen mapping.
Power down before handling. Inspect hinges, locks, cables and the display face. Follow the packing sequence and secure accessories for the next trip.
Magnetic front access supports module servicing from the display side. Agree the compatible spares, removal tool, calibration data and replacement procedure before the first deployment.
Request an opening-and-closing demonstration, a full-screen alignment check and playback verification. Match the demonstration to the model, controller and accessories in your order.
Operating positions depend on the mechanism and display layout. Some designs on the market support folded double-sided playback; this is not assumed for the Highcolor range. Confirm the approved positions, pixel mapping and ventilation requirements for the ordered model.
No. Use the designed folding joints and the supplied procedure. Highcolor’s current description lists flexible LED modules, but it does not specify a free-bending radius or unrestricted movement. Request the structure drawing if folding geometry is important to the project.
Compare complete case dimensions for equivalent quantities and accessories. A reduction in screen height does not directly equal a reduction in packed volume or freight cost. The worksheet above calculates volume from your actual packing dimensions.
Confirm the unit and case weights, ramp or lifting arrangement, access route and manufacturer’s handling instructions. Casters help reposition a display on suitable floors; they do not establish that one-person lifting or setup is appropriate.
Follow the model’s inspection schedule for hinges, locking points, cabinet alignment, moving cable sections, casters and screen protection. Request service guidance and any documented folding-cycle test conditions; no cycle-life figure is assumed here.
Use the prescribed locking sequence and a level installation surface. Check the display with a grid or alignment test pattern before playing the campaign. For multiple units, confirm edge hardware and alignment procedures as part of the system design.
Specify the required case and ask for an itemized packing list. Confirm how many units it holds, external dimensions, gross weight, wheel arrangement, loading method and protection for the display face and accessories.
Include the controller, optional surface protection, case, cables, joining accessories, spare modules, software services, freight and commissioning scope. Pitch, size, quantity and the agreed configuration determine the quotation.
Send your display requirements and transport constraints. Ask for the screen, controller, protection and packing to be quoted as one defined configuration.
sales@highcolorled.com
Active screen size, quantity, viewing distance, ambient light, sample content and playback mode.
Destination, event date, move frequency, door/lift limits, vehicle space and case requirements.
Also specify any request for folded playback, multi-unit splicing, battery power or exterior use so compatibility can be reviewed.