Se abre en una nueva pestaña
Fabricante de pantallas LED HighColor: alta calidad, colores reales
Highcolor / Portable digital signage

Foldable LED
Poster Display

A full-height campaign at the venue. A more compact format between stops. Build your event display around the way your team transports, sets up and uses it.

Highcolor foldable LED poster in upright and folded positions
FOLDABLE LED POSTERDisplay. Pack. Redeploy.
ESTRUCTURAFoldable aluminum frame
SERVICEMagnetic front access
LISTED REFRESH RATE3840 Hz configuration
SURFACE PROTECTIONOptional GOB
Designed for the next stop

Let the campaign travel
with the display.

Highcolor’s foldable LED poster brings a portrait LED screen, folding frame, integrated playback and rolling casters into one display format. It suits teams that reuse digital signage across temporary locations.

The current range lists flexible LED modules within a foldable aluminum structure. Use the approved folding mechanism and handling procedure; the display should not be bent beyond its designed movement.

01 / PROJECT FIT

Pop-up retail

Move product campaigns between short-term shops. Check the access route and power at each location.

02 / PROJECT FIT

Exposiciones

Prepare one repeatable screen, content and packing workflow for successive shows.

03 / PROJECT FIT

Renta para eventos

Specify protection, spares and inspection routines for equipment that changes hands.

04 / PROJECT FIT

Multi-site promotions

Keep content templates consistent while adapting playlists to each venue.

For a display that stays in one interior, also compare the indoor poster. For exterior use, start with the outdoor poster range and its site requirements.

Transport is part of the specification

Measure three states.
Plan one complete route.

Display area, folded dimensions and shipping dimensions answer different questions. Request a drawing for each state before choosing the packing and transport method.

UPRIGHT
FOLDED
PACKED
IN CASE

Conceptual states, not to scale. Dimensions and folding geometry depend on the selected model.

At the venue

Check total height, base width and depth, service clearance, pedestrian routes and the floor surface.

Between venues

Check case dimensions, gross weight, door and lift openings, vehicle capacity and the handling method.

Packing comparison worksheet

Compare the actual case volume.

Enter external case dimensions in centimetres. Use equivalent unit counts and accessories for both packing options.

Reference packing

Proposed folded packing

Add both sets of dimensions to compare cubic volume.

This calculates geometric volume only. Freight charges also depend on gross weight, carrier rules, route and service level.

Configuración del producto

Know what is listed.
Confirm what you will receive.

Use the current range information as a starting point, then approve a model-specific specification and packing list.

EspecificacionesCurrent product informationConfirm for the ordered model
Frame & foldingFoldable aluminum structure with flexible LED modulesFolding direction, locking points, allowed operating positions and mechanism drawing
Acceso al servicioMagnetic front maintenanceModule removal procedure, service tools and access clearance
Frecuencia de actualizaciónConfiguración indicada de 3840 HzExact model and drive configuration; camera test if required
Protección de superficiesGOB optionalCompatibility, repair procedure and replacement module specification
HandlingRolling castersUnit weight, base footprint, wheel/leveling arrangement and handling instructions
Content managementUSB, Wi-Fi and cloud optionsController model, physical inputs, software, storage and platform charges
Image & electricalSpecify for the selected configurationPitch, active dimensions, native pixels, operating brightness, input voltage and maximum/average power
Packing & expansionSpecify for the projectFolded dimensions, case size, gross weight, accessories and multi-unit compatibility

Match detail to viewing distance.

Provide the closest viewing distance and a sample of the smallest text. Confirm the native pixel width and height before preparing portrait content.

Match protection to handling.

Optional GOB can be considered for the display surface. It does not replace a protective case or establish the weather rating of the complete unit.

One screen or a coordinated installation

Specify the playback job
before the controller.

01 / STANDALONE CAMPAIGN

Prepare. Publish. Schedule.

Use a local playlist or a network-managed campaign with the appropriate player. Confirm file formats, local storage, software access and the update method.

For venues with unreliable internet, agree an offline playback workflow and test the stored content before dispatch.

02 / MULTI-UNIT PROJECT

Confirm the whole chain.

For one image across several posters, request compatible cabinet edges, joining hardware, alignment instructions and a signal diagram.

Maximum unit count depends on native resolution, controller load and interfaces. Power linking needs its own electrical limits; it is separate from signal cascading.

A folding mechanism does not automatically provide double-sided playback, battery operation or a wider video wall. Include any of these requirements in the configuration review.

A repeatable deployment workflow

From the first delivery
to the next event.

Use a consistent four-step process, supported by the selected model’s operating instructions and your venue plan.

01 / DEPLOYMENT

Plan the route

Check the packed dimensions and weight against vehicle, lift and doorway limits. Agree the loading equipment and number of handlers.

02 / DEPLOYMENT

Open & position

Follow the supplied unfolding sequence. Secure the frame, check alignment and place the unit on a suitable level floor with clear circulation.

03 / DEPLOYMENT

Connect & test

Connect the approved power and control equipment. Test native-resolution content, schedules, brightness and any multi-screen mapping.

04 / DEPLOYMENT

Inspect & repack

Power down before handling. Inspect hinges, locks, cables and the display face. Follow the packing sequence and secure accessories for the next trip.

Keep service practical.

Magnetic front access supports module servicing from the display side. Agree the compatible spares, removal tool, calibration data and replacement procedure before the first deployment.

Define acceptance before dispatch.

Request an opening-and-closing demonstration, a full-screen alignment check and playback verification. Match the demonstration to the model, controller and accessories in your order.

Foldable poster FAQ

Questions that affect
transport and daily use.

Can the poster play content while folded?

Operating positions depend on the mechanism and display layout. Some designs on the market support folded double-sided playback; this is not assumed for the Highcolor range. Confirm the approved positions, pixel mapping and ventilation requirements for the ordered model.

Does “foldable” mean the LED surface can be bent freely?

No. Use the designed folding joints and the supplied procedure. Highcolor’s current description lists flexible LED modules, but it does not specify a free-bending radius or unrestricted movement. Request the structure drawing if folding geometry is important to the project.

How much transport space will we save?

Compare complete case dimensions for equivalent quantities and accessories. A reduction in screen height does not directly equal a reduction in packed volume or freight cost. The worksheet above calculates volume from your actual packing dimensions.

Can one person move and set up the display?

Confirm the unit and case weights, ramp or lifting arrangement, access route and manufacturer’s handling instructions. Casters help reposition a display on suitable floors; they do not establish that one-person lifting or setup is appropriate.

What should we inspect after repeated deployments?

Follow the model’s inspection schedule for hinges, locking points, cabinet alignment, moving cable sections, casters and screen protection. Request service guidance and any documented folding-cycle test conditions; no cycle-life figure is assumed here.

How do we avoid visible alignment problems after unfolding?

Use the prescribed locking sequence and a level installation surface. Check the display with a grid or alignment test pattern before playing the campaign. For multiple units, confirm edge hardware and alignment procedures as part of the system design.

Is a flight case included in the quotation?

Specify the required case and ask for an itemized packing list. Confirm how many units it holds, external dimensions, gross weight, wheel arrangement, loading method and protection for the display face and accessories.

Which costs should we compare beyond the screen price?

Include the controller, optional surface protection, case, cables, joining accessories, spare modules, software services, freight and commissioning scope. Pitch, size, quantity and the agreed configuration determine the quotation.

Configure for your next deployment

Tell us about the venue.
And the journey there.

Send your display requirements and transport constraints. Ask for the screen, controller, protection and packing to be quoted as one defined configuration.

sales@highcolorled.com

Include these details in your enquiry

Display & content

Active screen size, quantity, viewing distance, ambient light, sample content and playback mode.

Transport & delivery

Destination, event date, move frequency, door/lift limits, vehicle space and case requirements.

Also specify any request for folded playback, multi-unit splicing, battery power or exterior use so compatibility can be reviewed.

Tell us about your project

Send your requirements to Highcolor for a model recommendation and quotation.